TEIJIN® TETORON® SLA

Product Description

Teijin® Tetoron® SLA is a super low shrinkage version of Teijin® Tetoron® type S polyester film. In addition to having the well balanced physical, chemical and electrical properties of type S film, Teijin® Tetoron® SLA has achieved one of the lowest thermal shrinkage characteristics with superior flatness. Teijin® Tetoron® SLA has a lower shrinkage than Teijin® Tetoron® SL. It has a slightly hazy appearance.

Typical Applications

Teijin® Tetoron® SLA is suitable for use in many electrical applications where super low thermal shrinkage and superior flatness are very critical, but low haze is not required. Teijin® Tetoron® SLA is recommended for Flexible Printed Circuits (FPC) and Membrane Touch Switches (MTS).

Typical Properties

Available Thickness [Gauge] 200;    500

Property Thickness Value Units Test OPTICAL Haze  200  6.0  %  ASTM D1003    PHYSICAL C.O.F. (dynamic)  200  0.36    ASTM D1894  C.O.F. (static)  200  0.33    ASTM D1894  Elongation at Break MD  200  160  %  ASTM D882A  Elongation at Break MD  500  190  %  ASTM D882A  Elongation at Break TD  200  120  %  ASTM D882A  Elongation at Break TD  500  130  %  ASTM D882A  Tensile Strength MD  200  29,000  psi  ASTM D882A  Tensile Strength MD  500  28,000  psi  ASTM D882A  Tensile Strength TD  200  32,000  psi  ASTM D882A  Tensile Strength TD  500  34,000  psi  ASTM D882A    THERMAL Shrinkage MD (150°C)  200-500  <0.1  %  Unrestrained @ 150°C/30 min  Shrinkage TD (150°C)  200-500  0.0  %  Unrestrained @ 150°C/30 min

Contact Info

DuPont Teijin Films U.S. Limited Partnership 3600 Discovery Drive P.O. Box 411 Hopewell, VA 23860 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for DuPont Teijin Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. DuPont Teijin Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (DuPont Teijin Films Medical Policy). For other medical applications, see the Medical Caution Statement. DuPont Teijin Films accepts no liability for use of it's products in medical applications not reviewed and approved by DuPont Teijin Films or for product misuse. DuPont Teijin Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of DuPont Teijin Films U.S. Limited Partnership. Teijin® and Tetoron® are registered trademarks of Teijin Limited used under license by DuPont Teijin Films U.S. Limited Partnership. Teonex® is a registered trademark of Teijin DuPont Films Japan Limited and is used under license by DuPont Teijin Films U.S. Limited Partnership.