TEONEX® Q83

Product Description

Teonex® Q83 is biaxially oriented, slightly hazy polyethylene naphthalate (PEN) film with excellent handling properties and high dimensional stability. It is commercially available in 100, 200 and 300 gauge (25, 50, 75 micron).

Approvals

UL 94 VTM-2 - for 100 through 300 gauge (0.025 - 0.075 mm) UL Component Registration (RTI = 180/160°C) - Relative Thermal Index (RTI) = 180°C (Elect), 160°C (Mech)

Typical Properties

Available Thickness [Gauge] 100;    200;    300

Property Thickness Value Units Test ELECTRICAL Dissipation Factor  200  4.6    JIS C-2318 (60Hz @ 25°C)  Dissipation Factor  200  5.3    JIS C-2318 (100KHz @ 25°C)  Permitivity  200  2.9    JIS C-2318 (60Hz @ 25°C)  Permitivity  200  2.8    JIS C-2318 (100KHz @ 25°C)  Volume Resistivity  200  2.9  10^17 Ohm  JIS C-2318 (@ 25°C)    OPTICAL Haze  200  12  %  JIS K6714  TLT  200  84  %  JIS K6714  UV Light Permeability @ 360 nm  200  11  %  TDF Method    PHYSICAL C.O.F. (dynamic)  20  0.3    ASTM D1894  C.O.F. (static)  200  0.3    ASTM D1894  Density  200  1.36  g/cm3  JIS C-2151  Elongation at Break MD  200  118  %  JIS C-2318 (Modified to TDF)   Elongation at Break TD  200  115  %  JIS C-2318 (Modified to TDF)   F5-MD  200  21  kpsi  TDF Method  F5-TD  200  21  kpsi  TDF Method  Modulus (Stiffness) MD  200  921  kpsi  ASTM D822 (Modified to TDF)  Modulus (Stiffness) TD  200  1018  kpsi  ASTM D822 (Modified to TDF)  Surface Roughness  200  13  nm  TDF Method (Inside)  Tear Propagation MD  200  2.0  lb  JIS-P8116  Tear Propagation TD  200  2.0  lb  JIS-P8116  Tensile Strength MD  200  30  kpsi  JIS C-2318 (Modified to TDF)   Tensile Strength TD  200  34  kpsi  JIS C-2318 (Modified to TDF)     THERMAL Glass Transition (Tg)  200  250  °F  DSC  Melting Point  200  516  °F  DSC  Shrinkage MD (150°C)  200  0.09  %  JIS C-2318 (Modified to TDF)   Shrinkage MD (200°C)  200  0.30  %  Unrestrained at 200°C/10 min  Shrinkage TD (150°C)  200  0.0  %  JIS C-2318 (Modified to TDF)   Shrinkage TD (200°C)  200  0.05  %  Unrestrained at 200°C/10 min

Contact Info

DuPont Teijin Films U.S. Limited Partnership 3600 Discovery Drive P.O. Box 411 Hopewell, VA 23860 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for DuPont Teijin Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. DuPont Teijin Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (DuPont Teijin Films Medical Policy). For other medical applications, see the Medical Caution Statement. DuPont Teijin Films accepts no liability for use of it's products in medical applications not reviewed and approved by DuPont Teijin Films or for product misuse. DuPont Teijin Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of DuPont Teijin Films U.S. Limited Partnership. Teijin® and Tetoron® are registered trademarks of Teijin Limited used under license by DuPont Teijin Films U.S. Limited Partnership. Teonex® is a registered trademark of Teijin DuPont Films Japan Limited and is used under license by DuPont Teijin Films U.S. Limited Partnership.