TEONEX® Q51

Product Description

Teonex® Q51 is biaxially oriented polyethylene naphthalate (PEN) film. It is slightly hazy with excellent handling properties for general purpose. It is commercially available in nominal 48 - 1000 gauge.

Approvals

UL 94 VTM-2 - 100 - 1000 gauge (0.025 - 0.25 mm) UL Component Registration (RTI = 180/160°C) - Relative Thermal Index (RTI) = 180°C (Elect), 160°C (Mech)

Typical Properties

Available Thickness [Gauge] 48;    1000

Property Thickness Value Units Test BARRIER WVTR  48  6.7  g/m˛/day  JIS Z0208    ELECTRICAL Breakdown Voltage  48  300  KV/mm  JIS C-2318  Dissipation Factor  48  0.003    JIS C-2318 (60Hz @ 25°C)  Dissipation Factor  48  0.005    JIS C-2318 (1KHz @ 25°C)  Dissipation Factor  48  0.005    JIS C-2318 (1GHz @ 25°C)  Permitivity  48  3.0    JIS C-2318 (60Hz @ 25°C)  Permitivity  48  2.9    JIS C-2318 (1KHz @ 25°C)  Permitivity  48  2.9    JIS C-2318 (1GHz @ 25°C)  Surface Resistivity  48  2  10^17 Ohm  JIS C-2151 @ 25°C  Volume Resistivity  48  10  10^17 Ohm  JIS C-2318 @ 25°C    OPTICAL Haze  48  14  %  JIS K6714  TLT  48  82  %  JIS K6714  UV Light Permeability @ 360 nm  48  8  %  TDF Method    PHYSICAL C.O.F. (dynamic)  48  0.3    JIS C2151  C.O.F. (static)  48  0.3    JIS C2151  Density  48  1.36  g/cm3  JIS C-2151  Elongation at Break MD  48  90  %  JIS C-2318 (Modified to TDF)   Elongation at Break TD  48  85  %  JIS C-2318 (Modified to TDF)   F5-MD  48  19  kpsi  TDF Method  F5-TD  48  19  kpsi  TDF Method  Moisture Absorption  48  0.3  %  TDF Method  Surface Roughness  48  13/11  nm  TDF Method (Inside/Outside)  Tear Propagation MD  48  1.3  lb  JIS-P8116  Tear Propagation TD  48  1.3  lb  JIS-P8116  Tensile Modulus MD  48  40  kpsi  JIS C-2318 (Modified to TDF)   Tensile Strength TD  48  38  kpsi  JIS C-2318 (Modified to TDF)   Wettability (water angle)  48  70  degree  TDF Method    THERMAL Coefficient of Hydrolytic Expansion  48  11  10^-6/ RH%  TDF Method  Glass Transition (Tg)  48  250  °F  DSC  Melting Point  48  516  °F  DSC  Shrinkage MD (150°C)  48  0.4  %  JIS C-2318 (Modified to TDF)   Shrinkage MD (200°C)  48  2  %  Unrestrained @ 200°C/10 min  Shrinkage TD (150°C)  48  0.0  %  JIS C-2318 (Modified to TDF)   Shrinkage TD (200°C)  48  1  %  Unrestrained @ 200°C/10 min

Contact Info

DuPont Teijin Films U.S. Limited Partnership 3600 Discovery Drive P.O. Box 411 Hopewell, VA 23860 USA Tel: (800) 635-4639 Fax: (804) 530-9867

Disclaimer

Note: These values are typical performance data for DuPont Teijin Films' polyester film; they are not intended to be used as design data. We believe this information is the best currently available on the subject. It is offered as a possible helpful suggestion in experimentation you may care to undertake along these lines. It is subject to revision as additional knowledge and experience is gained. DuPont Teijin Films makes no guarantee of results and assumes no obligation or liability whatsoever in connection with this information. This publication is not a license to operate under, or intended to suggest infringement of, any existing patents. CAUTION: Do not use in medical applications involving permanent implantation in the human body (DuPont Teijin Films Medical Policy). For other medical applications, see the Medical Caution Statement. DuPont Teijin Films accepts no liability for use of it's products in medical applications not reviewed and approved by DuPont Teijin Films or for product misuse. DuPont Teijin Films supplies products to an agreed specification and does not manufacture products designed specifically for medical end use. Melinex®, Mylar® and Melinex® STTM are registered trademarks of DuPont Teijin Films U.S. Limited Partnership. Teijin® and Tetoron® are registered trademarks of Teijin Limited used under license by DuPont Teijin Films U.S. Limited Partnership. Teonex® is a registered trademark of Teijin DuPont Films Japan Limited and is used under license by DuPont Teijin Films U.S. Limited Partnership.